You can enable or disable display of the barometric pressure change indicator as desired. When display of the indicator is enabled, the watch will take a barometric pressure reading every two minutes, regardless of the mode it is in.
When BARO is shown on the display, it means that barometric pressure change indicator display is enabled.
To enable or disable the barometric pressure change alert
In the Barometer/Thermometer Mode, hold down A for at least two seconds. Keep A depressed until the current setting (INFO Hold ON or INFO Hold OFF) starts to flash on the display.
- If barometric pressure change indicator display is currently enabled, BARO will also appear in the display. BARO will not appear if display is currently disabled.
- Note that barometric pressure change indicator display will turn off automatically 24 hours after you turn it on or battery power goes low.
- Note that time calibration signal reception and power saving (page E-14) are disabled while barometric pressure change indicator display is enabled.
- Note that barometric pressure change indicator display cannot be enabled while the watch’s battery is low.
